Condition-Based Maintenance of Bearing Faults in Rotary Machines
Keywords:
Vibration, Condition-based Maintenance, Condition monitoringAbstract
Bearing is a vital component of every rotating hardware. With progress in time, these bearings create issues which can be inward race, external race, ball, cage, or all of these. These bearing issues can be recognized by utilizing cutting-edge innovations like Vibration Investigation. The Vibrational analysis is one of the best strategies for fault detection. The reason for this study was to carry out a condition observing framework for bearing flaws. Thus vibration investigation has been carried out and tried to screen bearing faults. The vibration information from bearings is recorded and introduced here. To enhance the Overall Equipment Availability (OEA), this data is helpful and dependable information for support work to be financially savvy. Moreover, the outcome demonstrates how much high-level CBM practices are in the business, and it gives direction to additional innovative work around here. The paper concludes with a discussion of potential future trends and exploration areas that are predicted to extend the powerful and competent use of CBM.
References
S. Hess, W. Biter, and S. Hollingsworth, "An Evaluation Method for Application of
Condition Based Maintenance Technologies," in Proceedings of the Annual
Reliability and Maintainability Symposium, USA, Philadelphia, pp. 240-245, 2001.
A. Rastegari, "Condition Based Maintenance in Manufacturing Industries: Introducing
Current Industrial Practice and Challenges," in Proceedings of the 22nd International
Conference on Production Research, Iguassu Falls, Brazil, 2013.
Bengtsson, "Decision-Making during Condition Based Maintenance Implementation,"
in Proceedings of the 20th International Conference of Condition Monitoring and
Diagnostic Engineering Management, Coimbra, Portugal, 2007.
A. Starr, "A Structured Approach to the Selection of Condition Based Maintenance," in
Proceedings of the 5th International Conference on Factory, pp. 131-138, 2000.
E.E.Shipley, Gear failures, Machine Design, 39(1967).
H. Decker, Crack detection for aerospace quality spur gears, NASA TM-2002-211492,
ARL-TR-2682, NASA, and the US Army Research Laboratory (2002).
A. Mohammadi, M.S. Safizadeh, Bearing multiple defects detection based on envelope
detector time constant, Journal of Tribology, 135 (2013) 011102.
N.Tandon, A comparison of some vibration parameters for the condition monitoring of
rolling element bearings, Measurement, 12 (1994) 285- 289.
M.S. Carney, J.A. Mann, J. Gagliardi, Adaptive filtering of sound pressure signals for
monitoring machinery in noisy environments, Applied Acoustics, 43(1994) 333- 351.
N.G. Nikolaou, I.A. Antoniadis, Rolling element bearing fault diagnosis using wavelet
packets, NDT&E International, 35 (2002) 197-205.
M. Amarnath, R. Shrinidhi, A. Ramachandra, S.B. Kandagal, Prediction of defects in
antifriction bearings using vibration signal analysis, Journal of the Institution of
Engineers India, Part MC, Mechanical Engineering Division, 85 (2004) 88-92.
P.Chen, Bearing condition monitoring and fault diagnosis, Dissertation, University of
Calgary, (2000) 1-133.
Z. Kiral, H. Karagülle, Simulation and analysis of vibration signals generated by
rolling element bearing with defects, Tribology International, 36 (2003)667-678.
Z. Kiral, H. Karagülle, Vibration analysis of rolling element bearings with various
defects under the action of an unbalanced force, Mechanical Systems and Signal
Processing, 20 (2006) 1967-1991.
F.Honarvar, H.R. Martin, New statistical moments for diagnostics of rolling element
bearings, Journal of Manufacturing Science and Engineering, 119(1997)425-432.
Y.H. Kim, A.C. Tan, J. Mathew, B.S. Yang, Condition monitoring of low-speed
bearings: A comparative study of the ultrasound technique versus vibration
measurements, In Engineering asset management, Springer, London, (2006)182-191.
H.R. Martin, F. Honarvar, 1995, Application of statistical moments to bearing failure
detection, Applied acoustics, 44 (1995) 67-77.
F. Bolaers, O. Chouinard, P. Marconnet, L. Rasolofondraibe, Advanced detection of
rolling bearing spalling from de-noising vibratory signals, Control Engineering
Practice, 12 (2004) 181-190.
P.K. Kankar, S.C. Sharma, S.P. Harsha, Rolling element bearing fault diagnosis using
wavelet transform, Neurocomputing, 74 (2011) 1638-1645.
D. Goyal, B.S. Pablo, S.S. Dhami, K.C. Lachhwani, Optimization of condition-based
JASET, Vol.1, Issue 1, 2023
of 11
maintenance using soft computing, Neural Computing, and Applications, 2016
DOI: 10.1007/s00521-016-2377-6.
Hasan, M.J.; Sohaib, M.; Kim, J. An explainable ai-based fault diagnosis model for
bearings. Sensors 2021, 21, 4070.
Jiang, F.; Shen, X.; Jiang, F.; Zhao, Z. A bearing fault diagnosis method based on
improved convolution neural network and transfer learning. In Proceedings of the
SPIE 12127, International Conference on Intelligent Equipment and Special
Robots(ICIESR 2021),Qingdao, 12 December 2021.
Cheng, Y.; Lin, M.; Wu, J.; Zhu, H.; Shao, X. Intelligent fault diagnosis of rotating
machinery based on continuous wavelet transform-local binary convolutional neural
network. Knowl.-Based Syst. 2021, 216,106796.
Wang, H.; Liu, Z.; Peng, D.; Cheng, Z. Attention-guided joint learning CNN with
noise robustness for bearing fault diagnosis and vibration signal denoising. ISA
Trans. 2021.
Hasan, M.J.; Sohaib, M.; Kim, J.-M. A multitask-aided transfer learning based
diagnostic framework for bearings under inconsistent working conditions.
Sensors 2020, 20, 7205.
Qiao, Z.; Liu, Y.; Liao, Y. An improved method of EWT and its application in rolling
bearings fault diagnosis. Shock Vib. 2020,2020, 1–13.
Gu, R.; Chen, J.; Hong, R.; Wang, H.; Wu, W. Incipient fault diagnosis of rolling
bearings based on adaptive variational mode decomposition and Teager
energy operator. Measurement 2020, 149, 106941.
D. Goyal, Vanraj, B.S. Pablo, S.S. Dhami, Condition monitoring parameters for fault
diagnosis of fixed axis gearbox: a review, Archives of Computational Methods
in Engineering, (2016), DOI:10.1007/s11831-016-9176-1.
A. Bennane, S. Yacout, LAD-CBM; new data processing tool for diagnosis and
prognosis in condition-based maintenance, J Intell Manuf, 23(2012) 265–275.
D. Goyal, B.S. Pabla, The vibration monitoring methods, and signal processing
techniques for structural health monitoring: a review, Archives of Computational
Methods in Engineering, 23 (2016) 585-59
